DD-1017 (Steel)
DDA-1017 (Aluminum)

Features square tubular construction, with a maximum load capacity of 1,000 lbs. For light water craft and small fishing boats. Standard ramp length is 17’ and 40” wide, 1 ea. 9’ winch section, 1 ea. 8’ Roller section and 4 Cross Tubes with Keel Rollers. 6 ea. Wobble Rollers are easily adjusted horizontally & vertically to fit most small boat hulls. Features a manual winch on a triangular winch stand. 8’ sections can be added.

 DD-1017 Steel $424.00 Each
 DDA-1017 Aluminum $599.00 Each
Check with VE-VE inc. for shipping rates etc.

DD-1000 (Steel)
DDA-1000 (Aluminum)

View Photo

Features square tubular construction, with a maximum load capacity of 1,000 lbs. for light watercraft and small fishing boats. Standard ramp length is 24’ (3 ea. 8’ sections) & 40” wide, 6 cross tubes with keel rollers. 5 pair of wobble rollers are easily adjusted horizontally and vertically to fit most small boat hulls. Features a manual winch on a triangular winch stand. 8’ sections can be added.

Accessories:

• BR-10; 8' long steel extra section for DD-1017 & DD-1000
• BRA-10; 8' long aluminum extra section for DDA-1017& DDA-1000
• BR-20; support Kit 1 pr. 1 1/4” pipe clamps & 1 pr 1 1/4: base pads (no pipe included)
• BR-26; Anchoring kit (2ea. 1 1/4” x 3’ long pipe, 2 augers and brackets and mounting fastener)
• BR-27; Electric winch mounting plate. Fits 2” wide winch post, with fastener (no winch)
• BR-28; Mounting tube for Ve-Ve “Guide Ons” (click HERE for picture)
• BR-40; Steel cross tube assembly with keel roller and wobble rollers for DD-1000
• BRA-40; Aluminum cross tube assembly with keel roller and wobble rollers for DDA-1000
• BR-60; Steel cross tube with keel roller DD-1000
• BRA-60; Aluminum cross tube with keel roller for DDA-1000
• BR-70; Wobble roller assembly for DD-1000 & DDA-1000

 DD-1000 Steel $625.00 Each
 DDA-1000 Aluminum $875.00 Each
Check with VE-VE inc. for shipping rates etc.

 BR-10 $229.00 Each
 BRA-10 $319.00 Each
 BR-20 $39.00 Each
 BR-26 $68.95 Each
 BR-27 $34.95 Each
 BR-28 $49.95 Each
 BR-40 $84.70 Each
 BRA-40 $99.00 Each
 BR-60 $39.90 Each
 BRA-60 $52.00 Each
 BR-70 $44.80 Per Pair

DD-2017 (Steel)
DDA-2017 (Aluminum)

Features square tubular construction, with a maximum load capacity of 2,000 lbs. for O/B and light I/O boats. Standard ramp length is 17’ and 40” wide, 1 ea. 9’ winch section, 1 ea. 8’ Roller section and 4 Cross Tubes with Keel Rollers. 1 pr. of bunks with 36 ea. Rollers have fully adjustable positions - Horizontal, Tilt & Vertical - to fit most boat hulls. Features a manual winch on a triangular winch stand. 8’ sections can be added.

 DD-2017 Steel $625.00 Each
 DDA-2017 Aluminum $825.00 Each
Check with VE-VE inc. for shipping rates etc.

DD-2000 (Steel)
DDA-2000 (Aluminum)

View Photo

Features square tubular construction, with a maximum load capacity of 2,000 lbs. for O/B and light I/O boats. Standard ramp length is 24’ (3 ea. 8’ sections) and 40” wide, 6 cross tubes with keel rollers. 2 ea. 8’ pr. of roller bunks with 72 rollers have fully adjustable positions - horizontal, tilt and vertical to fit most boat hulls. Features a manual winch on a triangular winch stand. 8’ sections are easily added to both listed ramps.

Accessories:

• BR-15; 8' Steel extra section for DD-2017 & D-2000
• BRA-15; 8' Aluminum extra section for DDA-2017 & DDA-2000
• BR-20; support Kit 1 pr. 1 1/4” pipe clamps & 1 pr 1 1/4: base pads (no pipe included)
• BR-26; Anchoring kit (2ea. 1 1/4” x 3’ long pipe, 2 augers and brackets and mounting fastener)
• BR-27; Electric winch mounting plate. Fits 2” wide winch post, with fastener (no winch)
• BR-28; Mounting tube for Ve-Ve “Guide Ons” (click HERE for picture)
• BR-60; Steel cross tube assembly with keel roller for DD-2000
• BRA-60; Aluminum cross tube assembly with keel roller for DDA-2000

 DD-2000 Steel $899.00 Each
 DDA-2000 Aluminum $1,189.00 Each
Check with VE-VE inc. for shipping rates etc.

 BR-15 $349.00 Each
 BRA-15 $439.00 Each
 BR-20 $39.00 Each
 BR-26 $68.95 Each
 BR-27 $34.95 Each
 BR-28 $49.95 Each
 BR-60 $39.90 Each
 BRA-60 $52.00 Each

DDA-3000
Aluminum Boat Ramp

Aluminum square tube construction with a maximum load capacity of 2,600 lbs. for O/B and I/O boats. Standard ramp length is 24” (3 ea. 8’ sections) and 52” wide. It has 10 cross tubes with 10 keel rollers, all for greater hull support. 2 Pr. roller bunks. Fully adjustable - horizontal, vertical & tilt - to fit most boat hulls. Features a manual winch on a triangular winch stand. 8’ sections easily added.

Accessories:

• BRA-30’ 8' long Aluminum extra section for DDA-3000
• BR-20; support Kit 1 pr. 1 1/4” pipe clamps & 1 pr 1 1/4: base pads (no pipe included)
• BR-26; Anchoring kit (2ea. 1 1/4” x 3’ long pipe, 2 augers and brackets and mounting fastener)
• BR-27; Electric winch mounting plate. Fits 2” wide winch post, with fastener (no winch)
• BR-28; Mounting tube for Ve-Ve “Guide Ons” (click HERE for picture)
• BR-65; Aluminum cross tube assembly with keel roller & fastener for DDA-3000

 DDA-3000 Aluminum $1,995.00 Each
Check with VE-VE inc. for shipping rates etc.

 BRA-30 $895.00 Each
 BR-20 $39.00 Each
 BR-26 $68.95 Each
 BR-27 $34.95 Each
 BR-28 $49.95 Each
 BR-65 $58.90 Each

[Home] [Personal Water Craft] [Pontoon Ramp] [Boat Ramps]